Level 1 – Gloss Enhancement
Designed for nearly new or well maintained vehicles, this detail will improve the appearance and gloss depth of most vehicles where light swirl marks and other minor paint defects are present.

Time required: 1-2 days
The Process
*This is just a guide and may vary between vehicles depending on their condition.
-
- Wheels, tyres and under arches rinsed.
- Citrus based degreaser applied to wheels.
- Wheels and brake calipers cleaned using a selection of brushes and warm pH neutral soapy water.
- Pre wash lower half of vehicle using a citrus based cleaner and rinsed.
- A.P. Cleaner applied to tyres and under arches and agitated with selection of brushes.
- Wheels and under arches thoroughly rinsed.
- Citrus based degreaser applied to selected areas of bodywork.
- Exterior rinsed.
- Iron fallout remover applied.
- “Snow Foamed” applied using a pH neutral based foam and allowed to dwell.
- Vehicle washed using the “Two Bucket” method.
- Intricate areas cleaned using soft brushed, (grills, emblems, badges panel gaps etc.
- Two Bucket method wash technique to vehicle exterior.
- Vehicle rinsed thoroughly, (with filtered water where possible).
- Paintwork is clayed barred with appropriate clay to remove embedded contaminants.
- Vehicle dried using soft microfibre drying towels and/or warm air blower.
Level 2 – Light Correction
This detail builds on Level 1 and will significantly improve the appearance of most vehicles where heavy swirl marks, deeper scratches and other minor paint defects are present.

Time required: 2-3 days
Correction Factor: 80-95%
The Process
*This is just a guide and may vary between vehicles depending on their condition.
-
- Wheels, tyres and under arches rinsed.
- Citrus based degreaser applied to wheels.
- Wheels and brake calipers cleaned using a selection of brushes and warm pH neutral soapy water.
- Pre wash lower half of vehicle using a citrus based cleaner and rinsed.
- A.P. Cleaner applied to tyres and under arches and agitated with selection of brushes.
- Wheels and under arches thoroughly rinsed.
- Citrus based degreaser applied to selected areas of bodywork.
- Exterior rinsed.
- Iron fallout remover applied.
- “Snow Foamed” applied using a pH neutral based foam and allowed to dwell.
- Vehicle washed using the “Two Bucket” method.
- Intricate areas cleaned using soft brushed, (grills, emblems, badges panel gaps etc.
- Two Bucket method wash technique to vehicle exterior.
- Vehicle rinsed thoroughly, (with filtered water where possible).
- Paintwork is clayed barred with appropriate clay to remove embedded contaminants.
- Vehicle dried using soft microfibre drying towels and/or warm air blower
Level 3 – Full Correction
This detail will significantly improve the appearance of most vehicles where light swirl marks and other minor paint defects are present.

Time required: 4+ days
Correction Factor: 95-99%
The Process
*This is just a guide and may vary between vehicles depending on their condition.
-
- Wheels, tyres and under arches rinsed.
- Citrus based degreaser applied to wheels.
- Wheels and brake calipers cleaned using a selection of brushes and warm pH neutral soapy water.
- Pre wash lower half of vehicle using a citrus based cleaner and rinsed.
- A.P. Cleaner applied to tyres and under arches and agitated with selection of brushes.
- Wheels and under arches thoroughly rinsed.
- Citrus based degreaser applied to selected areas of bodywork.
- Exterior rinsed.
- Iron fallout remover applied.
- “Snow Foamed” applied using a pH neutral based foam and allowed to dwell.
- Vehicle washed using the “Two Bucket” method.
- Intricate areas cleaned using soft brushed, (grills, emblems, badges panel gaps etc.
- Two Bucket method wash technique to vehicle exterior.
- Vehicle rinsed thoroughly, (with filtered water where possible).
- Paintwork is clayed barred with appropriate clay to remove embedded contaminants.
- Vehicle dried using soft microfibre drying towels and/or warm air blower
Level 4 – Supreme Signature
This detail builds on Level 3 and is designed to ensure the appearance of your vehicle is the best it can absolutely with every surface protected from the elements.

Time required: 7+ days
Correction Factor: Upto 100%
The Process
*This is just a guide and may vary between vehicles depending on their condition.
-
- Wheels, tyres and under arches rinsed.
- Citrus based degreaser applied to wheels.
- Wheels and brake calipers cleaned using a selection of brushes and warm pH neutral soapy water.
- Pre wash lower half of vehicle using a citrus based cleaner and rinsed.
- A.P. Cleaner applied to tyres and under arches and agitated with selection of brushes.
- Wheels and under arches thoroughly rinsed.
- Citrus based degreaser applied to selected areas of bodywork.
- Exterior rinsed.
- Iron fallout remover applied.
- “Snow Foamed” applied using a pH neutral based foam and allowed to dwell.
- Vehicle washed using the “Two Bucket” method.
- Intricate areas cleaned using soft brushed, (grills, emblems, badges panel gaps etc.
- Two Bucket method wash technique to vehicle exterior.
- Vehicle rinsed thoroughly, (with filtered water where possible).
- Paintwork is clayed barred with appropriate clay to remove embedded contaminants.
- Vehicle dried using soft microfibre drying towels and/or warm air blower.